PERANCANGAN PIRANTI LUNAK RESPONSIVE UNTUK MONITORING RUANGAN SERVER MENGUNAKAN NODEMCU ESP8266 BERBASIS INTERNET OF THINGS

  • M. Safii Universitas Mulia
  • Novi Indrayani Universitas Mulia
Keywords: monitoring, software, responsive, nodeMcu

Abstract

The role of the server is very important as a data service provider and control for an office that has a very large data usage and control system. This can also affect the temperature in the server room which has computer devices and other control systems because of its continuous use. The impact of temperature that is outside of its tolerance value due to the dead air conditioner without being noticed by the officer or server operator can result in damage to the hardware devices in the server room. Monitoring and measuring server room temperature is not possible to be done directly and accurately in all conditions due to several inhibiting factors in obtaining temperature information. With these problems, a temperature monitoring prototype was built using node MCU ESP 2866 and DHT 21 sensor with responsive web-based software so that it can be easily seen on various PC and smartphone monitors. This software can be used in server rooms to provide room temperature information to operators or server officers. The long-term objective of this research is expected to provide information Real-time temperature conditions in a responsive web-based server room.

References

[1] Republik Indonesia. Rancangan Peraturan Menteri Komunikasi dan Informatika Republik Indonesia. Tentang Standardisasi Infrastruktur Pusat Data, 2018
[2] Reno. Z, “Perancangan monitoring suhu ruangan menggunakan arduino berbasis android di PT. Tunggal idaman abdi cabang Palembang”, Jurnal Teknologi Informasi, Lubuklinggau. Vol 8 (2). pp. 29-37K, 2016.
[3] Andrew. M, Sistem monitoring suhu ruang server dengan mikrokontroler arduino berbasis desktop, skripsi Universitas Dipenogoro, Semarang. 2016.
[4] Sawita I. A. S., & dik. “Alat monitoring suhu melalui aplikasi android menggunakan sensor LM35 dan modul sim800l berbasis mikrokontroler atmega16”, Buletin Fisika. Vol 18 (2) Pp. 58-62. 2018.
[5] Muhammad Safii, “Perancangan Sistem Monitoring Tegangan Output Genset menggunakan Ethernet Shield dan SMS Gateway berbasis Arduino Uno”, Jurnal METIK Vol 21, No 1 Pp 46-52, 2019.
[6] Kurnia D.S., & dkk, Perancangan Prototipe Sistem Kontrol Suhu dan Kelembaban pada Gedung Walet dengan Mikrokontroler Berbasis Mobile, Jurnal Edukasi dan Penelitian Indonesia. Vol 4 (1) pp.36-42. 2018.
[7] Aosong. Temperature and Humidity Module DHT22 Product. Manual. Guangzho: Electronic Co . 2018.
[8] http://www.instructables.com/id/Quick-Start-to-Nodemcu-ESP8266-onArduinoIDE/ diakses pada 16 Agustus 2019
[9] Riyanto, “Sistem Informasi Penjualan Dengan PHP dan MySQL”, Gava Media, Yogyakarta. 2010.
[10] Syahwil, “Teknik Pemrograman Arduino Sederhana”. Gramedia: Surabaya. 2013.
[11] Sulindawati, dan Fathoni, M. “Pengantar Analisa Perancangan Sistem” Medan: STMIK Triguna Dharma. 2010.
Published
2020-12-01
How to Cite
Safii, M., & Indrayani, N. (2020). PERANCANGAN PIRANTI LUNAK RESPONSIVE UNTUK MONITORING RUANGAN SERVER MENGUNAKAN NODEMCU ESP8266 BERBASIS INTERNET OF THINGS. Jurnal Ilmiah Matrik, 22(3), 270–277. https://doi.org/10.33557/jurnalmatrik.v22i3.1121
Section
Articles
Abstract viewed = 648 times
PDF : 645 times