Analisis Penilaian dan Evaluasi Risiko Keselamatan dan Kesehatan Kerja  dengan Metode FMEA pada Pemeliharaan Jaringan Transmisi Listrik di ULTG Lombok Barat

Authors

  • Sri Kusmiati Mataram University
  • Ida Ayu Sri Adnyani Mataram University
  • I Ketut Perdana Putra Mataram University

DOI:

https://doi.org/10.33557/1gmgzc45

Keywords:

FMEA, Risk Priority Number, ULTG Lombok Barat

Abstract

The West Lombok Transmission and Substation Services Unit (ULTG) has an important role in maintaining the electricity transmission network. However, this work has high risks, such as falling from heights, exposure to electromagnetic fields, and extreme environmental conditions. Therefore, this study aims to analyze risks and evaluate work safety control efforts using the Failure Mode and Effect Analysis (FMEA) method. This research uses a qualitative approach through interviews and questionnaires and quantitative with the calculation of Risk Priority Number (RPN). The results of the analysis show that the level of risk at ULTG West Lombok varies from very low (RPN 6.4) to low (RPN 25). The risks include work tool failure and potential worker accidents. To reduce the risks, measures such as the use of Personal Protective Equipment (PPE), implementation of safe work procedures, and regular inspection of tools and tower structures are carried out. Using the FMEA method, this research helps improve work safety and build a culture of Occupational Safety and Health (K3) at ULTG West Lombok.

Author Biographies

  • Ida Ayu Sri Adnyani, Mataram University

    Engineering department

  • I Ketut Perdana Putra, Mataram University

    Engineering Departemen

References

[1] Alfitra, M. M., Sugiono, & Sari, S. I. K. (2023). Penilaian risiko keselamatan dan kesehatan kerja (K3) pada proses grinding di PT. Nika (Persero) menggunakan metode Failure Mode and Effect Analysis (FMEA) dan Root Cause Analysis (RCA). Jurnal Rekayasa Sistem dan Manajemen Industri, 1(1), 46–57.

[2] Amalia, R. N., Dianinggati, R. S., & Annisaa, E. (2022). Pengaruh jumlah responden terhadap hasil uji validitas dan reliabilitas kuesioner pengetahuan dan perilaku swamedikasi. Generics: Journal of Research in Pharmacy, 2(1).

[3] Arifianto, Y. E., & Briliana, N. R. (2021). Identifikasi penyebab dan analisis risiko kegagalan proses produksi geomembrane pabrik plastik menggunakan pendekatan FMEA. SENTEKMI, 1(1), 67–68.

[4] Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa potensi bahaya dan perbaikan sistem keselamatan dan kesehatan kerja menggunakan metode HIRARC di PT. Boma Bisma Indra. Jurnal Valtech, 3(2).

[5] Ilham, R., & Basuki, M. (2023). Penilaian risiko keselamatan dan kesehatan kerja (K3) pada PT Dewa Ruci Agung dengan menggunakan metode Hazard Identification and Risk Assessment and Determining Control (HIRARDC). Jurnal Ilmu Teknik dan Teknologi Maritim, 2(2).

[6] Rajab, N. I., Serang, R., & Titaley, H. D. (2024). Penerapan metode FMEA untuk menganalisis risiko kecelakaan kerja pada pembangunan Madrasah Tsanawiyah Negeri 6 Maluku Tengah. Ulil Albab: Jurnal Ilmiah Multidisiplin, 3(10), 192–200.

[7] Saputra, B. R., & Widodo, I. D. (2023). Analisis pengendalian risiko keselamatan dan kesehatan kerja (K3) dengan metode Failure Mode and Effect Analysis (FMEA) di PT ABC. Jurnal Material dan Proses Manufaktur, 7(2), 128–139.

[8] Wahjutasaputri, S., & Purwanto, A. (2022). Statistika Pendidikan: Teori dan Aplikasi. Yogyakarta: CV. Bintang Semesta Media.

Downloads

Published

2025-08-19

Issue

Vol. 22 No. 1 (2025): JURNAL TEKNO

Section

Articles

License

Creative Commons License
Jurnal Tekno by journal.binadarma.ac.id/index.php/jurnaltekno is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

How to Cite

[1]
“Analisis Penilaian dan Evaluasi Risiko Keselamatan dan Kesehatan Kerja  dengan Metode FMEA pada Pemeliharaan Jaringan Transmisi Listrik di ULTG Lombok Barat”, jtekno, vol. 22, no. 1, Aug. 2025, doi: 10.33557/1gmgzc45.